Honda FRC800 Owner's Manual page 42

SERVICING YOUR TILLER
During adjustment, line up the groove of the engine-side pulley and
that of the transmission-side pulley. If they are not aligned, the belt
may come off or will wear prematurely.
5. Loosen the belt stopper attaching bolts. Adjust the clearance
between the belt stopper and the belt as illustrated with the clutch
lever squeezed.
6. After adjustment has been completed, fasten the nut securely.
7. Install the belt cover.
After checking or adjusting the drive belt, be sure to reinstall the belt
cover. The cover is designed to help shield you from the moving belt
and pulleys.
40
ENGINE-SIDE PULLEY
0.04 0.12 in (1 3 mm)
0 0 . . 2 2 8 8 0 0 . . 3 3
Contact with the moving belt or
pulleys may cause you or your
clothing to get caught in the moving
parts resulting in serious accident or
injury.
Always keep the belt cover installed
when operating the tiller.
TRANSMISSION-SIDE PULLEY
5 5 i i n n ( ( 7 7 9 9 m m m m ) )