Engine Oil Change - Honda F220 Owner's Manual

SERVICING YOUR HONDA TILLER
ENGINE OIL CHANGE
Drain the oil while the engine is warm to assure rapid and complete draining.
1. Place a suitable container below the engine to catch the used oil, then
remove the filler cap, drain plug and sealing washer.
2. Allow the used oil to drain completely, then reinstall the drain plug and
sealing washer. Tighten the plug securely.
Improper disposal of engine oil can be harmful to the environment. If you
change your own oil, please dispose of the used oil properly. Put it in a
sealed container and take it to a recycling center. Do not discard it in
a trash
bin or dump it on the ground.
3. With the tiller in a level position, fill to the upper limit of the level gauge with
the recommended oil (see page 29).
Oil Capacity: 0.31 US qt (0.30.t)
pi6iE-l
Running the engine with a low oil level can cause engine damage.
4. Screw in the filler cap securely.
OIL FILLER CAP
DRAIN PLUG
P
SEALING
WASHER
I
DRAIN PLUG
28