Engine Oil - Honda FRC800 Owner's Manual

STORAGE

Engine Oil

1. Change the engine oil (page
2. Remove the spark plug (page
3. Pour a tablespoon (5
4. Pull the starter rope several times to distribute the oil in the cylinder.
5. Reinstall the spark plug.
6.
Pull the starater grip slowly until resistance is felt, and the notch on
the starter pulley aligns with the hole at the top of the recoil starter
cover. This will close the valves, so moisture cannot enter the
engine cylinder. Return the starter rope gently.
50
31 ).
36
10 cc) of clean engine oil into the cylinder.
STARTER GRIP
).
Align the notch on the starter
pulley with the hole at the top of
recoil starter.