Spark Arrester Service - Honda FRC800 Owner's Manual

SERVICING YOUR TILLER
SPARK ARRESTER SERVICE (applicable types)
Your engine is not factory-equipped with a spark arrester. In some
areas, it is illegal to operate an engine without a spark arrester. Check
local laws and regulations. A spark arrester is available from
authorized Honda servicing dealers.
The spark arrester must be serviced every 6 months or 100 hours to
keep it functioning as designed.
If the engine has been running, the muffler will be very hot. Allow the
muffler to cool before servicing the spark arrester.
1. Remove the mounting bolt.
2. Remove the two 8 mm nuts and remove the muffler from the
cylinder.
3. Remove the two 4 mm screws from the muffler deflector, and
remove the muffler deflector.
4. Remove the six 5 mm screws from the muffler protector, and
remove the muffler protector.
5. Remove the special screw from the spark arrester, and remove the
spark arrester from the muffler.
MUFFLER PROTECTOR
5 mm SCREWS
MOUNTING BOLT
42
MUFFLER
SPECIAL SCREW
8 mm NUTS
5 mm SCREWS
4 mm SCREWS
MUFFLER DEFLECTOR
SPARK ARRESTER