Honda FRC800 Owner's Manual page 49

2. After washing the tiller, wipe dry all accessible surfaces.
3. Start the engine outdoors, and let it run until it reachs normal
operating temperature to evaporate any water remaining on the
engine.
4. While the engine is running, operate the clutch lever to expel water
from the pulleys, belts, and other moving items.
5. Stop the engine and allow it to cool.
6. After the tiller is clean and dry, touch up any damaged paint and
coat other areas with a light film oil. Lubricate the throttle cable core
with a silicone spray lubricant.
STORAGE
47