Tine Replacement - Honda FRC800 Owner's Manual

6. Use a brush to remove carbon deposits from the spark arrester
screen. Be careful to avoid damaging the screen.
The spark arrester must be free of breaks and holes. Replace the
spark arrester if it is damaged.
7. Install the spark arrester and muffler protector, in the reverse order
of disassembly.

TINE REPLACEMENT

Use genuine Honda replacement tines or their equivalent. Wear heavy
gloves to protect your hands.
Nut and bolt positions
For rotary tines A/B and E'/F':
Tighten the bolts from outside in.
Make sure to install the tine plates.
For other tines: Tighten the bolts
from inside out.
10 mm NUTS/
10 mm SPRING WASHERS
SPARK ARRESTER SCREEN
TINE PLATES
10 mm BOLTS
SERVICING YOUR TILLER
Tine positions
Rotary tines C/D and C'/D':
Toward outside.
Others: Toward inside.
A C E
B D F
A' C' E'
B' D' F'
43