Introduction; Pictograms Used; Important Instructions; Useful Advice - REMEHA GAS 210-80 ECO PRO Technical Information

2. Introduction

2. Introduction

2.1 Pictograms used

2.2 Important instructions

8
The following pictograms are used in this document to emphasise
certain instructions. This is in order to increase your personal
safety and to safeguard the technical reliability of the boiler . The
pictograms used are:
 Useful advice.
 Important instruction for carrying out an action.
 Possible risk of bodily injury or material damage to boiler ,
building or environment.
 Possible risk of electrical shocks. Serious bodily injury may
occur .
The boiler must be installed in a frost-free area.

Work on the boiler
Installation, commissioning, maintenance and repair work may
only be carried out by suitably qualified specialist installers in
accordance with the applicable national and local standards and
guidelines.Always disconnect the mains supply and close the main
gas cock when working on the boiler . Check the entire system for
leaks after maintenance and servicing work.
Casing panels may only be removed for maintenance and servic-
ing purposes. Refit all panels on completion of maintenance and
servicing work.
Instruction and warning labels on the boiler must never be
removed or covered and must be clearly legible throughout the
entire service life of the boiler. Replace damaged or illegible
instruction and warning labels immediately. Generally applicable
safety instructions related to accident prevention must be con-
sulted in addition to the information supplied in this technical docu-
mentation.
Boiler modifications
Modifications to the boiler require the written approval of Broag.

Keep this document near to the installation.
GAS 210 ECO PRO
114494-190310