Loading Label Stock - Wasp WPL205 User Manual

3.2 Loading Label Stock

1. Insert a 1" label spindle into a paper roll (If your paper core is 1 inch, remove the 1.5 inch
core adapter from the fixing tab).
Printing Side Face up
2. Open the printer's top cover by releasing the yellow top cover open levers located on
both sides of the printer and lifting the top cover.
3. Place a roll of paper into internal paper roll mount.
4. Feed the paper, printing side face up, through the label guides and place the label over
the platen.
5.
Adjust the black center-biased label guides in or out by turning adjustment knob so they
are slightly touch the edges of the label backing.
Label Guide
1.5" Core Adapter
1" Label Spindle
Label Roll Mount
Adjustment Knob
Platen
5
Label Roll
Fixing Tab