Table of Contents
Advertisement
IDE Drive x Monitoring
This option enables IDE device activity to keep the system awake.
1. Move the cursor to IDE Drive x Monitoring and press Enter.
2. Select the desired setting from the drop-down menu.
Disabled
Enabled
PCI Bus Monitoring
This option enables activity on the PCI bus to keep the system awake.
1. Move the cursor to PCI Bus Monitoring and press Enter.
2. Select the desired setting from the drop-down menu.
Disabled
Enabled
Video Power State Control
Use this option to configure the video power state behavior.
1. Move the cursor to Video Power State Behavior and press Enter.
2. Select the desired setting from the drop-down menu.
Auto
Off
Standby
Suspend
•
Auto – video power state is always the same as the system
•
Off, Suspend, Standby – video is set to Off, Suspend, or Standby
state during all system low-power transitions
Chapter 3: Setup 3-29
Advertisement
Table of Contents
