SERR Signal Condition
This option selects the ECC error conditions that SERR# asserts.
1. Move the cursor to SERR Signal Condition and press Enter.
2. Select the desired setting from the drop-down menu.
None
Single bit
Multiple bit
Both
Default Primary Video Adapter
This selects the type of video card used for the boot display device.
1. Move the cursor to Default Primary Video Adapter and press Enter.
2. Select the desired setting from the drop-down menu.
PCI
AGP
•
PCI – use installed PCI card for the boot display device
•
AGP – use installed AGP card for the boot display device
Chapter 3: Setup 3-21