Table of Contents
Advertisement
2-6
Chapter 2: Hardware Installation
Installing Peripherals
7158 Printer
1. Connect the Printer Interface Cable to the RS-232 Connector on the
printer, located on the underside of the printer.
Cash Drawer
Power
Connector
Printer
Connector
RS232
2. Connect the other end of the printer cable to a USB port or one of
the RS-232 ports (non-powered) on the terminal.
3. Connect the Power Brick cable to the Power Connector on the
printer.
4. Plug the Power Brick into an AC outlet.
17333
Advertisement
Table of Contents
