Cable Routing From The I/O Board; Terminal Configured With A Dvd-Rom Drive - NCR RealPOS 72XRT POS User Manual

2-50 Installing the Terminal

Cable Routing from the I/O Board

There are two ways to secure the cables from the I/O Board.
• With DVD-ROM Drive
• Without DVD-ROM Drive

Terminal Configured with a DVD-ROM Drive

If configured with a DVD the cables are routed in the two channels in the bottom of the
Base. Route the cables in the channels and under the closed pivoting latches. Secure the
cables to the anchor points using Tie Wraps as necessary.