NCR 7455 Hardware User's Manual page 124

4-10 Chapter 4: Operating System Recovery
10. The directory that Ghost is now looking in should be Z: (if not,
switch to Z). Select the File name to load image from file
(nnnnnnn.gho) and press Enter.
11. Select the Local Destination Drive and press Enter.
12. Set the size of the 1st partition (which is FAT16) to the desired
amount.
Note: In order to do this, you may need to clear the amount from
the 2nd partition.
13. Set the size of the 2nd partition.
O/S
Windows NT
Windows 98
Windows
2000
DOS
14. Press Enter.
15. If you are recovering from Win9x, it is likely that the 2nd partition
will be too small for FAT32. If so, a dialog is displayed
Converting partition from FAT32 to FAT, proceed?
Choose Yes.
16. At the next dialog box,
Proceed with disk load? Destination drive will be
permanently overwritten,
Choose Yes to start the recovery process.
2 nd Partition Format 2 nd
NTFS Fill the remaining drive space
FAT32 Fill the remaining drive space
FAT32 Fill the remaining drive space
FAT16 2GB
Partition Size