Installing a Remote Customer Display
The terminal supports three high-post remote customer displays. The
mounting configuration is the same and appearance is similar:
•
7448 Remote Customer Display (4x20 characters, VFD)
•
5972-1000 Remote Customer Display (2x20 characters, VFD)
•
5973 International VFD Customer Display
7448 Remote Customer Display
1. Place the Display Mount on the desired surface within 4 meters (13
feet) of the host terminal.
2. Determine if the cable should be routed down through the
mounting surface or if it should be run on top of the surface.
Chapter 2: Hardware Installation 2-11
16670