Table of Contents
Advertisement
How to Select Menu Options
Restoring Factory Settings
The following keyboard controls are used to select the various menu
options and to make changes to their values.
•
Use the arrow keys to select (highlight) options and menu screens.
•
Use the + and - (or F5 and F6) keys to change field values.
•
To view help information on the possible selections for the
highlighted item, press F1.
•
To save the changes, move the cursor to the Exit Menu, select either
Save Changes & Exit or Save Changes, and press Enter.
Note: If you are not using an external keyboard, you can touch the
menu controls at the bottom of the screen. If you encounter difficulty
doing this, recalibrate the screen.
To automatically reset all values to their default settings for the current
screen, press F9. The terminal automatically loads BIOS default CMOS
values for boot up.
To reset all BIOS settings to their default settings go to the Exit Menu,
press F9, select either Save Changes & Exit or Save Changes, and press
Enter.
See the BIOS Default Settings section later in this chapter for the pre-
installed Setup defaults.
Chapter 3: Setup
3-3
Advertisement
Table of Contents
