Table of Contents
Advertisement
3-12 Chapter 3: Setup
Fdc On Lpt
Use this option to enable the primary floppy on the parallel port.
1. Move the cursor to Fdc On Lpt and press Enter.
2. Select the desired setting from the drop-down menu.
Disabled
Enabled
Floppy Disk Controller
This option configures the Floppy Disk Controller. Since there is no
floppy disk on the terminal, set this option to Disabled.
Mode (Port C)
This option sets the mode for serial port C.
1. Move the cursor to Mode and press Enter.
2. Select the desired setting from the drop-down menu.
Normal
IrDA
ASK-IR
Advertisement
Table of Contents
