Table of Contents
Advertisement
Multiple ROM Menu
Move the cursor to Multiple ROM Menu and press Enter. The items on
this submenu are used to load/unload specific ROMs in the next boot.
1. Move the cursor to the appropriate Selectable ROM x option and
press Enter.
2. Select the desired setting from the drop-down menu.
Disabled
Enabled
•
Disabled – do not load ROM
•
Enabled – load ROM in next boot
Note: Due to space limitations, only enable the required ROMs.
Refer to the following table for ROM usage information.
ROM
On-board Intel
LAN
Parallel CD-ROM
Boot
On-board Intel PXE
WaveLAN
WaveLAN PXE
Beep Error Codes
The Beep Error Codes option enables/disables beep codes on error(s).
Move the cursor to Beep Error Codes, press Enter, and select On or Off.
Use
Intel Ethernet hardware-specific portion of the
Ethernet Boot ROM. Requires the On-board Intel
PXE ROM to also be enabled.
Allows reloading of OS through a CD ROM
connected to the parallel port.
PXE protocol portion of the Ethernet Boot ROM.
Requires the On-board Intel LAN ROM to also be
enabled.
Boot ROM for WaveLAN 802.11 PCMCIA card.
Requires WaveLAN PXE to also be enabled.
PXE protocol ROM for use with the WaveLAN
ROM.
Chapter 3: Setup 3-17
Advertisement
Table of Contents
