Selecting The Stitch Plate In The User Interface; Needle And Stitch Plate; Inserting The Embroidery Needle - Bernina 700 User Manual

Embroidery Preparation
> Press the clamping lever down.

Selecting the Stitch Plate in the User Interface

After fitting the corresponding embroidery foot, it can be selected and saved on the machine. Furthermore,
any alternative feet that are available for the respectively selected embroidery design are displayed.
> Switch the machine on.
> Select the embroidery design.
> Tap «Presser Foot Indicator/Presser Foot Selection».
> To display all suitable presser feet for the selected embroidery design, tap «Optional Presser Feet».
> Select the fitted embroidery foot.

2.7 Needle and Stitch Plate

Inserting the embroidery needle

Embroidery needles of the type 130/705 H-SUK provide a larger eye and are slightly rounded. This avoids
thread abrasion when using Rayon- and cotton embroidery thread. Depending on the embroidery thread
use a size No. 70-SUK to No. 90-SUK needle.
> Raise the needle.
> Switch off the machine.
> Remove the fitted foot.
> Loosen the fixing screw of the needle using the screwdriver gray Torx.
35