Dsc Operation; Dsc Address Id - Icom ic-m423 Instruction Manual

7

DSC OPERATION

DSC address ID

■
D Entering an Individual ID
A total of 100 DSC address IDs can be entered and assigned
a name of up to 10 characters.
Enter "INDIVIDUAL ID" in the DSC SETTINGS menu.
q
➪ DSC Settings 
MENU
(Push [MENU].)
Push [ADD].
w
• The "INDIVIDUAL ID" entry screen is displayed.
Enter a desired individual ID in the following way:
e
• Select a desired number using Dial, or [Y]/[Z]/[Ω]/[≈].
• Push [ENT] or Dial to set it.
• To move the cursor, select either arrow, "←" or "→," then push
[ENT] or Dial.
The first digit is specified as '0,' and the second digit is
other than '0' for a Group ID.
The first two digits are '0' for any Coast station ID.
Repeat step e to enter all 9 digits.
r
22
➪ Individual ID
(Rotate Dial, then push [ENT].)
After entering the 9 digit code, push [ENT] or Dial to set it.
t
•The ID name entry screen is displayed.
Enter a desired 10 digit ID name in the following way:
y
• Select a desired character using Dial, or [Y]/[Z]/[Ω]/[≈].
• Push [ENT] or Dial to set it.
• To move the cursor, select either arrow, "←" or "→," then push
[ENT] or Dial.
• Push [123], [!$?], or [ABC] to select a character group.
After entering the ID name, select "FINISH" using Dial, or
u
[Y]/[Z]/[Ω]/[≈], then push [ENT] or Dial to program it.
• The "INDIVIDUAL ID" list screen is displayed.
Push [MENU] to exit the MENU screen.
i