Icom ic-m423 Instruction Manual page 66

7
DSC OPERATION
■ Receiving DSC calls (Continued)
D Receiving a Group Call/Geographical Area Call/All Ships Call
When a Group Call, Geographical Area Call, or All Ships Call
is received:
The alarm sounds for 2 minutes.
➥
"RCVD GROUP CALL," "RCVD GEOGRAPHICAL," or
➥
"RCVD ALL SHIPS CALL" is displayed. The backlight may
blink for 2 minutes, depending on the received Category.
Push [ALARM OFF] to stop the alarm and the blinking
q
backlight.
• Even if you do not push [ALARM OFF], the alarm stops after 2
minutes, and then the screen in step w is displayed.
Push a softkey to select your desired action.
w
56
[IGN]
Push to ignore the Call and return to the normal operat-
➥
ing mode.
• The transceiver exits the DSC mode.
• " " continues to blink and the Call is stored in the Received
Call Log.
[INFO]
Push to display the Received call information. (p. 61)
➥
[ACPT]
Push to monitor the channel specified by the calling
➥
station for an announcement from the calling station.
Note for Geographical Area Call
When no GPS receiver is connected or if there is a prob-
lem with the external receiver, all Geographical Area Calls
are received, regardless of your position.