Icom ic-m423 Instruction Manual page 57

D Making a Position Reply call
Make a Position Reply call when a Position Request call is
received.
When the "POSITION ACK" in DSC Settings is set to 'Auto
TX' (p. 63), the transceiver automatically transmits a reply call
when a Position Request call is received.
Quick Reply:
When a Position Request call is received, alarm sounds
q
and the screen shown below is displayed.
Push [ALARM OFF] to stop the alarm.
Push [ACK].
w
• Push [EXIT] to return to the normal operating mode.
• Push [INFO] to display the Test call information.
About Received call information:
• Push [EXIT] to return to the normal operating mode.
• Push [BACK] to return to the previous screen.
• Push [ACK] to go to the next step.
The Position Reply confirmation screen is displayed.
e
Push [CALL] to make a reply call.
While transmitting the reply call, the screen shown below
r
is displayed, and then returns to the normal operating
mode.
7
DSC OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
47