Icom ic-m423 Instruction Manual page 45

Select a desired intership channel using Dial or [
e
then push [ENT].
• Intership channels are already preset into the transceiver in the
recommended order.
About Manual Entry:
Enter a desired group ID in the following way:
• Select a desired number using Dial, or [Ω]/[≈].
• Push [ENT] or Dial to set it.
• To move the cursor, select either arrow, "←" or "→," then push
[ENT] or Dial.
• The first digit is specified as '0,' and the second digit is other than
'0' for a Group ID.
• The first two digits are '0' for any Coast station ID.
Y]/[Z], A confirmation screen
r
• Confirm the call contents.
Push [CALL] to make a Group call.
t
• If Channel 70 is busy, the transceiver stands by until the channel
becomes clear.
After the Group call has been transmitted, the following
y
screen is displayed.
Announce the information using the microphone.
u
After the announcement, push [EXIT] to return to the nor-
i
mal operating mode.
DSC OPERATION
is displayed.
7
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
35