Icom ic-m423 Instruction Manual page 60

7
DSC OPERATION
■ Making DSC calls
D Making a Position Report Reply call (continued)
Manual Reply:
Enter "REPORT REPLY" in the DSC CALLS menu.
q
➪ DSC Calls
MENU
(Push [MENU].)
• If no Position Report Request call is received, the Position Re-
port Reply item will not be displayed.
• Push [EXIT] to return to the normal operating mode.
• Push [BACK] to return to the previous screen.
Select a desired Position Report Request call to reply to,
w
using Dial or [Y]/[Z], then push Dial or [ENT].
50
➪ Position Report Reply
(Rotate Dial, then push [ENT].)
The Position Report Reply call confirmation screen is dis-
e
played.
Push [CALL] to make an acknowledgement call.
While transmitting the reply call, the screen shown below
r
is displayed, and then returns to the normal operating
mode.