[Ent]; Push [Back] To Cancel And Return To The Dsc Settings Menu; (Default); Menu - Icom ic-m423 Instruction Manual

D Alarm
Set the Alarm function ON or OFF, depending on the Cat-
egory or Status.
q Enter "ALARM" in the DSC Settings menu.
➪ DSC Settings
MENU
(Push [MENU].) (Rotate Dial, then push [ENT].)
w Rotate Dial or push [Y]/[Z] to select the status, then push

[ENT].

• Push [BACK] to return to the previous screen.
• "Safety," "Routine," "Warning," "Self-Terminate" and "Discrete" are
selectable. (default: ON )
Y]/[Z] to set the Alarm setting to "ON"
Rotate Dial or push [
e
or "OFF."
Push [EXIT] to return to the normal operating mode.
r
➪
Alarm
D Channel 70 Squelch level
Set the squelch level on Channel 70.
The transceiver has 11 squelch levels between 1 (loose
squelch) and 10 (tight squelch) and OPEN.
OPEN is completely open.
q Enter "CH 70 SQL LEVEL" in the DSC Settings menu.
➪ DSC Settings
MENU
(Push [MENU].) (Rotate Dial, then push [ENT].)
w Rotate Dial or push [Y]/[Z] to adjust the squelch level until
the noise just disappears, then push [ENT].

• Push [BACK] to cancel and return to the DSC Settings menu.

Push [EXIT] to return to the normal operating mode.
e
7
DSC OPERATION
➪ CH 70 SQL Level

(default)

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
65