Icom ic-m423 Instruction Manual page 44

7
DSC OPERATION
■ Making DSC calls
D
Making an Individual Acknowledgement (continued)
Manual ACK:
Enter "INDIVIDUAL ACK" in the DSC CALLS menu.
q
➪ DSC Calls
MENU
(Push [MENU].)
• When no Individual call has been received, the Individual ACK
item will not be displayed.
Select a desired individual address or ID code to reply to,
w
using Dial or [Y]/[Z], then push [ENT].
• Push [EXIT] to return to the normal operating mode.
• Push [BACK] to return to the previous screen.
Do steps e to u, as described in "Quick ACK:," beginning
e
on the previous page.
34
➪ Individual ACK
(Rotate Dial, then push [ENT].)
D Making a Group call
The Group call function allows you to make a DSC signal to
only a specific group.
Enter "GROUP CALL" in the DSC CALLS menu.
q
➪ DSC Calls
MENU
(Push [MENU].) (Rotate Dial, then push [ENT].)
Select a desired preset group address or "Manual Input,"
w
using Dial or [Y]/[Z], then push Dial or [ENT].
• The ID code for the Group call can be entered first. (p. 22)
• When "Manual Input" is selected, enter the 8 digit ID code for the
group you wish to call.
• Push [EXIT] to return to the normal operating mode.
• Push [BACK] to return to the previous screen.
➪ Group Call
+ Continued on the next page.