Table of Contents
Advertisement
Bar Graph:
The bar graph indicates how much of the
scale's capacity is "used up" by the current
load; during checkweighing, it indicates
the control limits.
The following symbols may be displayed:
0%
Lower load limit
100%
Upper load limit
Bar graph showing 10% intervals
-
Minimum for checkweighing
=
Target for checkweighing
+
Maximum for checkweighing
Plus/Minus Sign, Stability Symbol:
A plus or minus sign (
or
) is shown
F
H
here for a weight (or a calculated value,
such as that for counting), or the
indicating that a verified scale has been
zeroed or tared.
Line for Measured Values:
This area shows the weighed or calculated
value and the alphanumeric input.
Note Concerning Verified Scales
Approved for Use as Legal Measuring
Instruments in the EU*:
For verified scales that have a verification
e
scale interval
which is greater than
d
the scale interval
, the last digit on the
display is bordered.
Unit and Stability:
When the scale reaches stability, the
weight unit or calculated unit is displayed
here.
a
When the
symbol is displayed here,
the value indicated in the readout cannot
be used in legal metrology.
* including the Signatories of the Agree-
ment on the European Economic Area
Tare Memory, Calculated Values:
The symbols displayed here indicate
when there is a value in one of the tare
memories or when the value shown is a
result of calculation rather than direct
measurement.
These symbols are as follows:
a
Calculated value
s
1
Net value | tare memory
s
2
used by an application program
(e.g., formulation, second tare
memory)
Application Pictograms:
The pictograms displayed here indicate
the application(s) selected. The pic-
togram is displayed inversely (white on
a black background) when the corre-
sponding application is active.
symbol
S
For example, the following symbols
may be displayed simultaneously:
The counting application is active
A
Checkweighing is also active
H
Print
S
Data record
T
Text Line:
Additional information is displayed here
(e.g., operator guidance prompts, name
of the active program, etc.)
Soft Key Labels:
The current functions of the soft keys
above the function keys (arrow keys)
are indicated here; during calibration |
adjustment, this line shows up- and
down-arrows (
calibration and adjustment functions.
and
) for selecting
Q
q
Display for Menu Parameter Settings
(Setup)
This display is divided into three sec-
tions.
Line for Operating State
Input and Output Window
Soft key labels
Status Line:
The status line of shows the function
of the display screen page. In the Setup
menu, the current menu "path" is
shown here.
Setup Menu Example: "Balance/scale
functions":
SETUP
BAL.FUNC.
Input and Output Window
This window contains either detailed
information (e.g., on the active
application) or a pick list. A selected
item is displayed inversely (white
characters on a black background).
You can also enter information in an
active field in this window using the
alphabetic and numeric keys.
Setup Menu Example,
"Device parameters, Adapt filter":
Minimum vibration
o Normal vibration
Strong vibration
Extreme vibration
The following symbol may be displayed
in the input and output window:
this symbol marks the saved
d
menu setting
Soft Key Labels
See the description "Function Keys
(Soft Keys)" on the previous page
5
Hide quick links:
Advertisement
Table of Contents
