Flag 3 - Receipt Consecutive Number, Cash Register Number; Flag 4 - Required Operations; Flag 5 A) - Communication With Pc And Payment Terminal; Flag 5 B) - Scanner And Scales Configuration - ELCOM Euro-100T User Manual

Programming manual

Flag 3 - Receipt consecutive number, cash register number

Figure 3.3. Third system flag values
Digit Default setting
1 0
2 – 3 01
4 – 7 0001

Flag 4 - Required operations

Figure 3.4. Fourth system flag values.
Digit Default setting
1 1
2 0
3 0
4 0

Flag 5 a) - Communication with PC and payment terminal

Figure 3.5. a) Fifth a) system flag values.
Digit Default setting Meaning
1 5 PC port number
Programming of communication speed for the PC.
2 1
Parity: none, DataBits: 8, StopBits: 1
3 0 Data transmission direction in PC-ON LINE mode
4 0
5 0
Two and more devices can´t be assigned in F5a) and F5b) to the same serial port.

Flag 5 b) - Scanner and scales configuration

Figure 3.5. b) Fifth b) system flag values.
Digit Default setting
1 0
2 3
26
Meaning
Receipt consecutive number clearing
Cash register number
Receipt consecutive number
Meaning
Subtotal amount print out after Subtotal key is pressed
Required Subtotal key pressed before receipt is finished
Required Credit Card number entering if paid by Credit
Required customer's payment amount entering
Meaning
Scanner port number
Bar code scanner communication speed
Valid values
0 – after "Z" total (daily) report,
1 – after "Z" periodical report
(01 – 99)
(01 – 9 999)
Valid values
0 – no, 1 – yes
0 – not required,
1 – required
0 – not required,
1 – required
0 – not required,
1 – required
Valid values
0 – device is not used
3 - COM3
4 - COM4
5 - USB port
0 – 9 600 Bd
1 – 38 400 Bd
0 – PC transmits
1 – PC transmits and receives
not used
not used
Valid values
0 – device is not used
3 - COM3, 4 - COM4
0 – 1 200 Bd
1 – 2 400 Bd
2 - 4 800 Bd
3 - 9 600Bd
4 - 19 200Bd