Table of Contents
Advertisement
Programming manual
3) Re-program the parameters as described in section above.
4) You can print the newly programmed tax level values by pressing
5) Finish the corrections by pressing the
Printing of the programmed tax values
To verify the programmed values, print them by pressing the
mode. If working in another programming mode, press the
key. It is possible to print the rate and name of a particular tax level by pressing the
RECEIPT TEXT LOGO PROGRAMMING
The Euro-100T can print up to nine lines of text at the beginning of the receipt (e. g. "Roy's Food Store",
"Thank you" etc.) Euro-100T can have on each line up to 18 normal sized/9 double sized characters.
Logo programming procedure:
1) Switch the ECR to the "P" mode by pressing
2) Press the
3) The notification „
gramming the first line of the text logo and then display will show the currently programmed text.
If programmed text is longer than is possible to display, then in the left part will be displayed its
length. Enter new data for the current logo line. If you mistype or make a mistake, you can delete
previous characters by pressing
in, starting from the left.
.
4) Press the
5) Press the
Correction of the text logo lines
1) Switch the ECR to the "P" mode by pressing
2) Enter the line number you want to correct and press
3) Re-programme with corrected value as shown in section above.
4) You can print out the entire logo by pressing
(EAN) key.
5) Finish corrections by pressing the
30
(PO) key.
1. LOGO LINE
(S
) key. The next line will appear on the display and is ready for editing.
UBTOTAL
(T
) key to finish the programming of receipt logo lines.
OTAL
(T
) key.
OTAL
.
" appears at the display and informs you that you are pro-
(C
) key. Programmed text will be printed out just as typed
LEAR
.
(C
) key; print out the current line by pressing
HECK
(T
) key.
OTAL
(C
) key.
HECK
(C
) button in the tax programming
HECK
(R
) key and then the
EUND
(PO).
(C
)
HECK
(E
) button.
AN
Advertisement
Table of Contents
Need help?
Do you have a question about the Euro-100T and is the answer not in the manual?
Questions and answers
How to fix error f06