ELCOM Euro-100T User Manual page 81

ERROR 37
ERROR 22
Paper mis.
ERROR 02
PASSWORD
PASSW.DUP.
DO.D.REP.
DO.M.REP.
ERROR 12
ERROR 10
ERROR 19
ERROR 14
Prn
ERROR 08
RECHA. BAT
SALE
ERROR 18
ERROR 04
ERROR 16
STANDBY
VAT INACT.
ERROR 09
NO ACCESS
ERROR 07
WAIT ...
OFF&ON ECR
ERROR 42
ERROR 43
UNKNO. BAT
LOW BATT
VERYLOWBAT
RESET CODE
BAT CHECK.
DO PLU R.
Bar code not processed during sale.
DPT (PLU) flag prevents entry of price from keyboard.
Paper is missing in the printer.
Incorrect setting of ECR parameters.
It is necessary to cashier login.
Password is assigned to another cashier already.
Perform daily (total) report.
Perform periodical report.
PLU flag disables the sale of this PLU.
Press subtotal.
HALO limit over. Check the flags of DPT or PLU.
Programmed price is zero.
Receipt printing off. The printing can be switched on by pressing  button.
DPT or PLU flag setting prevents use of programmed price.
It is necessary to connect external adapter.
Normal sale mode. Data on receipt in R mode are counted to GTs.
Sale amount reached maximum. Terminate the sale.
Electronic scales are disconnected, or no data has been read.
PLU flag disables split pricing.
Standby mode. Exit the "standby" mode by pressing the  (MODE) button.
DPT or PLU is assigned to inactive tax level.
Particular tax level amount over limit from the last daily report. Perform daily
(total) report.
Cashier has no authorization to enter into this mode.
Bar code is assigned to no PLU.
ECR executes operation that takes a longer time.
To correct the problem turn off and turn on ECR.
Maximal amount of refunded items is reached. Perform daily (total) report.
Maximal amount of discounts is reached. Perform daily (total) report. „DISC
Battery status unknown, recharge the battery.
It is shown when receipt it printing, when it is needed bigger power input.
Connect ECR to power supply with external adapter.
Connect ECR to power supply with external adapter.
Memory can be damaged. Call for service.
Checking battery condition.
While switching to the second Euro phase. Perform „Z" PLU report.
Helpful advice
81