ELCOM Euro-100T User Manual page 34

Programming manual
Programming procedure:
1) Switch the ECR to the "P" mode by pressing
2) Press the

display to indicate department price programming. Then programmed price appears at the display.
. 
3) Enter the new department price (maximum eight digits, including decimals). If you mistype, you can
correct your mistakes by pressing
4) Press the

display shows current department number together with label ("
ment flag programming. Then value of department's flag is shown at the first display row. Press
(T ) key to stop department programming (next steps will not run).
OTAL
. 
5) Enter the department flag for the current department according to the Figure 3.16. If you mistype,
you can correct it using the
Figure 3.16. Department flag values
Digit Default setting
1 0
2 0
3 0
4 3
5 8
Note: It is possible to assign DPT only to the programmed VAT level.
6) Press (S

ECR display shows current department number along with the label ("
rent department name is shown.
.
34
(DPT) key. The current department number and the label ("

(S ) key to continue with programming the flag for the current department. The
UBTOTAL
(C

Meaning
Assigning VAT level to a department
Type of department
Negative department
Sale feature
HALO limit, maximum 8 (maximum number of
digits allowed)
) key to continue with programming the name for the current department. The
UBTOTAL


.

(C ) key.

LEAR
) key.
LEAR
DPT PR
DPT FLAG ") to indicate depart-
Valid values
0 – no tax ,
1 – tax level 1,
2 – tax level 2,
3 – tax level 3,
4 – tax level 4,
5 – tax level 5,
6 – tax level 6
0 – normal,
1 – single item department
0 – no,
1 – yes
0 – sale forbidden,
1 – open price (manually entered price),
2 – fixed price (preprogrammed price),
3 – 1+2 (preprogrammed price or the possibi-
lity to enter a price manually)
1-8
DPT NAME
") appear at the

"). Then cur-