Accessing The Web Interface - Ruckus Wireless MediaFlex 2900 User Manual

Multimedia access point
Table of Contents

Advertisement

!
CAUTION:—Make sure to write down the new IP address, username, password and SSID. If you change the
MF2900 AP's default IP address to one outside the current address range of your PC, you will not be able to
connect to the device after reboot until you reset your computer's IP address to be within the same network
as the MF2900 AP. See
AP Default and User Settings Worksheet," on page 21
You should now be able to find the default SSID "V54" of your MF2900 AP over your wireless connection:
Table 4—Default Wireless Settings
Wireless Feature
Network Name (SSID)
Security

Accessing the Web Interface

The MF2900 AP provides a Web-based user interface for configuration and monitoring. For information
about using the Ruckus Wireless Web Interface, refer to
Interface
.
1. To access the Ruckus Wireless Web Interface, launch a Web browser and enter the MF2900 AP's IP address.
If this is the first time the access point is being configured, enter the default IP address: http://192.168.0.1
2. A logon screen will appear. Use the default logon information:
Username:
admin
Password: <blank>
After logging in, you will see the main information page. On the information page, there are two panes. The
pane on the left shows major information or configuration points. Each major information or configuration
area has a number of sub-menus. Clicking on the relevant menu will bring the relevant page onto the screen.
The system monitors the activities on the Web user interface. If you do not use the Web interface for more
than five minutes, the system will time out, and you will be logged out automatically. You need to re-log in
to access the interface.
!
CAUTION:—Any configuration changes will be lost unless you use the Update button. It is recommended
that after each configuration screen you modify, you click the Update button.
8000001, December 2005
Table 5, "Wireless Network Settings Worksheet," on page 20
Setting
V54
Disabled
MediaFlex 2900 Multimedia Access Point User's Guide
for more information.
Chapter 3:, "Using the Ruckus Wireless Web

Accessing the Web Interface

and
Table 6, "M2900
.
17

Advertisement

Table of Contents
loading

Table of Contents