Running the Setup Wizard and
Logging On to the Web Interface
In this chapter:
•
Overview of the SCG Setup Wizard
•
Step 1: Start the Setup Wizard and Set the Language
•
Step 2: Configure the Management IP Address Settings
•
Step 3: Configure the DataPlane IP Address Settings
•
Step 4: Configure the Cluster Settings
•
Step 5: Verify the Settings
•
Connecting the SCG to the Network
•
Logging On to the Web Interface
SmartCell Gateway 200 Release 2.5.1 Getting Started Guide, 800-70768-001 Rev A
4
35