Ugw-Linked Download (Remote Distribution Update) - Canon imageRUNNER ADVANCE-series Service Manual

3
Operations > Firmware Operations > Downloading and Updating Firmware > b. UGW-linked Download (Remote Distribution Update)
b. UGW-linked Download (Remote Distribution Update)
See the figure below for the operational flow of "UGW-linked download".
STEP 1
Scheduling
via UGW
STEP 1: Scheduling via UGW
The firmware distribution schedule to the certain device should be set on UGW.
See "UGW-linked Download" in Operation Manual of CDS V1.0 (for Firmware Distribution) for
details.
NOTE:
The firmware downloaded by scheduling via UGW can be checked/deleted from User
mode, but cannot be updated.
If a user download the other firmware, the firmware downloaded with "UGW-linked
Download" is overwritten.
STEP 2: Update using Updater
The firmware downloaded on the device can be updated using Updater functions.
1. Start [Service Mode] at Level 1.
1). Press [Setting/Registration (User mode)] button on the control panel.
2). Press [2] and [8] buttons at a time on the control panel.
3). Press [Setting/Registration (User mode)] button on the control panel.
4). [Service Mode] screen is shown.
3 Operations > Firmware Operations > Downloading and Updating Firmware > b. UGW-linked Download (Remote Distribution Update)
STEP 2
Update using
Updater
F-3-3 F-3-3
2. Press [Updater] button.
3. Press [Update Firmware] button.
3-3
F-3-4 F-3-4
F-3-5 F-3-5
3-3