Updating Downloaded Firmware (Applying Firmware) - Canon imageRUNNER ADVANCE-series Service Manual

3
Operations > Firmware Operations > Updating Downloaded Firmware (Applying Firmware)

Updating Downloaded Firmware (Applying Firmware)

This section describes how to update the downloaded firmware.
1. Start [Service Mode] at Level 1.
1). Press [Setting/Registration (User mode)] button on the control panel.
2). Press [2] and [8] buttons at a time on the control panel.
3). Press [Setting/Registration (User mode)] button on the control panel.
4). [Service Mode] screen is shown.
2. Press [Updater] button.
3. Press [Update Firmware] button.
3 Operations > Firmware Operations > Updating Downloaded Firmware (Applying Firmware)
4. Press [Apply Firmware] button.
5. Confirm the downloaded firmware and press [Yes] button.
F-3-26 F-3-26
6. The firmware is applied to the device. The device is automatically restarted when the
firmware is successfully applied.
3-12
F-3-27 F-3-27
F-3-28 F-3-28
3-12