Deleting Downloaded Firmware - Canon imageRUNNER ADVANCE-series Service Manual

3
Operations > Firmware Operations > Deleting Downloaded Firmware
7. When the device is restarted, confirm the version of the firmware.
1). Press [Check Counter Key] button on the control panel.
2). Press [Check Device Configuration] button.
3). Confirm if the updated firmware version corresponds to [Controller Version].
Now the firmware is successfully updated in the method.

Deleting Downloaded Firmware

This section describes how to delete the downloaded firmware using Updater.
1. Start [Service Mode] at Level 1.
1). Press [Setting/Registration (User Mode)] button on the control panel.
2). Press [2] and [8] button at a time on the control panel.
3). Press [Setting/Registration (User Mode)] button on the control panel.
4). [Service Mode] screen is shown.
2. Press [Updater] button.
3. Press [Update Firmware] button.
3 Operations > Firmware Operations > Deleting Downloaded Firmware
4. Press [Delete Firmware] button.
5. Confirm the downloaded firmware to be deleted and press [Yes] button.
6. Confirm the result of deletion and press [OK] button. Now the downloaded firmware is
successfully deleted.
F-3-29 F-3-29
3-13
F-3-30 F-3-30
F-3-31 F-3-31
3-13