4
Maintenance > How to Replace Devices
How to Replace Controller Boards
The steps are different depending on which of 2 controller boards are to be replaced.
•
Main Controller Board PCB 1
No steps follow.
•
Main Controller Board PCB 2 (including SRAM)
The network and service mode setting should be set again after initialization. See
"Preparation" in chapter 2 of this manual for details.
4
Maintenance > How to Replace Devices
How to Replace Devices
All settings should be set again because no data are inherited. See "Preparation" in chapter 2
of this manual for details.
4-3
4-3