Limitations And Cautions; Limitations; Cautions - Canon imageRUNNER ADVANCE-series Service Manual

Hide thumbs Also See for imageRUNNER ADVANCE-series:
Table of Contents

Advertisement

1
Functional Overview > Limitations and Cautions > Cautions

Limitations and Cautions

Limitations

Changing Date/Time on Device
When a user changes the date/time setting on the device (including change of the setting
according to daylight saving time), the firmware distribution may not be performed as
scheduled.
But there is not the problem if it is time adjustment of several minutes with NTP servers.
Change of Setting from Service mode
Any settings from Service mode will be enabled after restarting the device.

Cautions

Concurrent use of Updater functions
Multiple users cannot use Updater functions on a device concurrently by using it together with
Remote UI.
Coexistence of Remote UI and other tools
Users logged in SMS (Service Management Service) are unable to use Update functions
from Remote UI.
Using Updater function from Remote UI
Upon the following operations done, Updater functions are suspended from Remote UI for
certain duration.
When a user exits Web browser without clicking [Portal] or [Log Out] button in the setting of
Remote Login Service via SMS
When a user exits Web browser without clicking [Portal] button in the setting of not to use
Remote Login Service via SMS.
When a user exits Web browser without clicking [Log out from SMS] or [To Remote UI]
button.
Wait for EOJ (end of job) Function
Firmware update will be triggered only after the following jobs are completed.
This is the Updater-specific specification.
1
Functional Overview > Limitations and Cautions > Cautions
Job/Function
Receiving
Printing
type
COPY
-
Wait for EOJ *1 Wait for EOJ *1
PRINT
Wait for EOJ
Wait for EOJ *1 Wait for EOJ *1
(end of job)*1
FAX
Wait for EOJ *1 Wait for EOJ *1 Wait for EOJ *1 Wait for EOJ *1 Wait for EOJ *1
I-FAX Receipt
Cancel
Wait for EOJ *1 Wait for EOJ *1
processing to
trigger update
*1
SCAN *2
-
Wait for EOJ *1
Report Print
-
Wait for EOJ *1 Wait for EOJ *1
*1: Soon after receipt, Print and FAX jobs are not recognized as jobs.
*2 SCAN jobs are recognized as EOJ upon scanning completed.
Even during transfer, Pull SCAN job processing is cancelled soon after scanning is
completed.
Firmware update is cancelled if the jobs are not completed within 10 minutes. If this occurs,
the error code, 8x001106, will be returned (different numbers will be shown for x depending
on the execution modes).
Firmware update is executed if the jobs stated above are not in the queue.
Follow the shutdown sequence to reboot the device after the firmware is updated.
The following firmware versions do not support Wait for EOJ Function.
iR-ADV V5000 series: V40.17 or earlier
iR-ADV V7000/9000 series: V40.18 or earlier
For the versions above, triggering firmware update will cancel all COPY/PDL jobs
submitted and/or queued. Only jobs with power-off safeguard (Fax/ I-Fax/ Auto-Report
Print) are recovered after reboot.
1-6
Queued print
Sending
Queued send
jobs
jobs
-
-
-
-
-
-
-
-
-
-
-
T-1-3
T-1-3
1-6

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents