Canon imageRUNNER ADVANCE-series Service Manual page 24

3
Operations > Firmware Operations > Downloading and Updating Firmware > b. UGW-linked Download (Remote Distribution Update)
4. Press [Apply Firmware] button.
5. Confirm the downloaded firmware and press [Yes] button.
6. The firmware is applied to the device. The device is automatically restarted when the
firmware is successfully applied.
3 Operations > Firmware Operations > Downloading and Updating Firmware > b. UGW-linked Download (Remote Distribution Update)
7. When the device is restarted, confirm the version of the firmware.
1). Press [Check Counter Key] button on the control panel.
2). Press [Check Device Configuration] button.
3). Confirm if the updated firmware version corresponds to [Controller Version].
Now the firmware is successfully updated in the method of "Manual Download and Update".
[Devices without Wait for EOJ Function]
•
Firmware update will delete print jobs in the queue. Ensure to notify users of this
before you start updating. It is recommended to perform firmware update during
non-business hours.
[Devices with Wait for EOJ Function]
•
Firmware update will not be triggered when any of the following jobs remains in the
queue.
F-3-6 F-3-6
-Print
-Scan
-Fax (except I-FAX; this function is enabled for I-FAX only during Print/Scan operation)
See Chapter 1 "Limitations and Cautions" of this manual for more detailed information.
NOTE:
To contacts registered for E-mail notification on UGW, the E-mail is sent from UGW
upon completing firmware update.
F-3-7 F-3-7
3-4
3-4