Canon imageRUNNER ADVANCE-series Service Manual page 28

3
Operations > Firmware Operations > Downloading and Updating Firmware > c. Manual Download and Update (On-site Update from Service Mode)
8. [Confirm Conditions of Use] screen is shown as below. Check the contents and press
[Accept] button.
9. One of the screens below is shown according to the setting.
•
When Distribution Time and Timing to Apply of Distribution Setting are set to [Now] and
[Auto], respectively:
Firmware is downloaded and updated automatically to the device. The device is
automatically restarted upon update completed. Now STEP 1 is successfully completed.
3 Operations > Firmware Operations > Downloading and Updating Firmware > c. Manual Download and Update (On-site Update from Service Mode)
•
When Distribution Time and Timing to Apply of Distribution Setting are set to [Now] and
[Manual], respectively:
Confirm the firmware and press [OK] button. Now STEP 1 is successfully completed.
•
F-3-15 F-3-15 When Distribution Time is set to [Set Time] in Distribution Setting:
Confirm the distribution schedule and press [OK] button. Now STEP 1 is successfully
completed.
F-3-16 F-3-16
3-8
F-3-17 F-3-17
F-3-18 F-3-18
3-8