Canon imageRUNNER ADVANCE-series Service Manual page 30

3
Operations > Firmware Operations > Downloading and Updating Firmware > c. Manual Download and Update (On-site Update from Service Mode)
5. Confirm the downloaded firmware and press [Yes] button.
6. The firmware is applied to the device. The device is automatically restarted when the
firmware is successfully applied.
7. When the device is restarted, confirm the version of the firmware.
1). Press [Check Counter Key] button on the control panel.
2). Press [Check Device Configuration] button.
3). Confirm if the updated firmware version corresponds to [Controller Version].
Now the firmware is successfully updated in the method of "Manual Download and Update".
3 Operations > Firmware Operations > Downloading and Updating Firmware > c. Manual Download and Update (On-site Update from Service Mode)
[Devices without Wait for EOJ Function]
•
Firmware Update will delete all print jobs in the queue. It is recommended to update
firmware during non-business hours with no print jobs.
[Devices with Wait for EOJ Function]
•
Firmware update will not be triggered when any of the following jobs remains in the
queue.
-Print
-Scan
-Fax (except I-FAX; this function is enabled for I-FAX only during Print/Scan operation)
See Chapter 1 "Limitations and Cautions" of this manual for more detailed information.
F-3-22 F-3-22
3-10
3-10