System Logs - Canon imageRUNNER ADVANCE-series Service Manual

3
Operations > System Management Operations > Displaying Logs > System Logs
4. Press [Select Log Display] button.
5. Press [Display Update Logs] button.
3 Operations > System Management Operations > Displaying Logs > System Logs
6. System Option/MEAP Application Installation Logs and Firmware Update Logs are shown.
Press [OK] button to exit this operation.
F-3-39 F-3-39

System Logs

This section describes how to confirm System Logs.
1. Start [Service Mode] at Level 1.
1). Press [Setting/Registration (User Mode)] button on the control panel.
2). Press [2] and [8] buttons at a time on the control panel.
3). Press [Setting/Registration (User Mode)] button on the control panel.
4). [Service Mode] screen is shown.
2. Press [Updater] button.
F-3-40 F-3-40
3-17
F-3-41 F-3-41
3-17