Scanning Instructions; Scanning 1D Barcode; Scanning 2D Barcode - Newland BS80 User Manual

Scanning Instructions

Scanning 1D Barcode

Adjust the scan angle (Do not read barcode at vertical degree) or the distance between barcode and the
scanner to ensure that the length of the scan line is roughly 8mm greater than that of the barcode, as
shown below.

Scanning 2D Barcode

Adjust the scan angle and the distance between barcode and the scanner to make them fall into the
following ranges:
1. Aim the scan line across the center of the barcode.
2. Optimum scan distances: 5-20cm.
10