Table of Contents
Advertisement
【Start Setup】
Power off Timer
The HR15 cordless scannerwill power-off automatically if it hibernates overtime (default: 5 minutes)
【Auto power off after 5 minutes in sleep mode.】
【Auto power off after 20 minutes in sleep mode.】
【Auto power off after 60 minutes in sleep mode】
Reading Mode
Manual Scanning Mode
Default setting, the scanner will begin to read the barcode after the trigger is pressed, it will stop after successful reading or
if the trigger is loosed.
The scanner can set the reading time in the manual scanning mode.
Note: In the manual scanning mode, the unit of barcode scanning time is 1 second. The parameter range from 0 to15
second. 0 means continue scan.
【Exit Setup】
【Auto power off after 10 minutes in sleep mode】
【Auto power off after 30 minutes in sleep mode】
【Manual Scanning】
【Set the Reading Time】
【Never Power off】
19
Advertisement
Table of Contents
