Table of Contents
Advertisement
Interleaved 2 of 5‖, thus, if the scanner is unable to read the Interleaved 2 of 5, please try to read the setuo barcode ―allow
to read Interleaved 2 of 5‖.
Code ID Setup
To activate the setup function by reading ―CodeID setup‖, then read the hexadcimal value inaccordance with the character
which will be set to the CodeID.
Example: Set the CodeID ofInterleaved2 of 5 to ―p‖ (the hexadcimal value is 0x70).
1. Read the ―Start Setup‖ barcode.
2. Read the ―CodeID Setup‖ barcode.
3. Read the numeric barcode ―7‖, ―0‖ (see the appendix—numeric barcode)
4. Read the ―Save‖ barcode.(see the appendix—numeric barcode)
5. Read the ―Exit Setup‖ barcode.
Set Whether or not to Transmit the Check Character
Interleaved 2of 5 barcode data does not compulsively include the check digit, if check digit exists, then it is the last
character. Check digit is calculated according to all the datas, for checking if the data is correct or not.
Set ―No Check‖, the scanner will transmit all the barcode data.
Set ―Check but do not Send Check Digit‖, the scanner will check according to the last bit, if successful, all the data
except for the check digit will be transmitted, if failed, then the scanner will indicate ―barcode reading failed‖.
Set ―Check and Send Check Digit‖ the scanner will check according to the last bit, if successful, all the data including
the check digit will be transmitted, the check digit will be treated as the last bit of the normal data; if failed, then the
scanner will indicate ―barcode reading failed‖.
Check and Transmit Check Character
58
CodeID Setup
No Check
Check but do not Transmit the Check Character
【Start Setup】
【Exit Setup】
Advertisement
Table of Contents
