7
88
Pull the bulb 2 out of the
socket 3.
Replace defective bulb.
Bulb for license-plate
z
light
W5W / 12 V / 5 W
Press the bulb 2 into the
socket 3.
Press bulb socket 1 into
lamp carrier.
Install cable guard with
screw 1.
Jump-starting
The wires leading to the
power socket do not
have a load-capacity rating
adequate for jump-starting
the engine. Excessively high
current can lead to a cable
fire or damage to the motor-
cycle electronics.
Do not use the onboard sock-
et to jump-start the engine of
the motorcycle.