Table of Contents
Advertisement
Checking rear brake pad
7
thickness
Dropping below the
68
minimum pad thickness
leads to reduced braking
performance and may result
in damage to the brakes.
In order to ensure the operat-
ing reliability of the brake sys-
tem, make sure that the brake
pads are not worn beyond
their minimum thickness.
Make sure ground is level
z
and firm and park the mo-
torcycle.
Check the brake pad
thickness on the rear
brake caliper 1 with visual
inspection from the left.
Rear brake-pad wear
limit
0.04 in (1 mm) (Only fric-
tion material without carri-
er plate)
Brake disk must not be
visible through bore hole
of inner brake pad.
If brake disk is visible:
Have the brake pads re-
placed by a specialized
workshop, preferably an
authorized BMW Motorrad
retailer.
Advertisement
Table of Contents
