Table of Contents
Advertisement
tween the top and bottom
4
clamping blocks.
40
z
Threaded fasteners not
tightened to the speci-
fied torque can work loose or
their threads can suffer dam-
age.
Always have the tightening
torques checked by a spe-
cialized workshop, preferably
an authorized BMW Motorrad
retailer.
Tighten large screws 2 with
torque.
Handlebar clamping
block on fork bridge
28 lb/ft (38 Nm)
No gap may remain be-
tween handlebar clamp-
ing blocks on side of large
screws.
If necessary, slacken
screws 1 and retighten
screws 2 to the specified
tightening torque.
Tighten the small screws 1
with torque.
Handlebars on handle-
bar clamping block
14 lb/ft (19 Nm)
A gap remains between
handlebar clamping blocks
on side of small screws.
Mirrors
Adjusting mirrors
Move mirror into desired
position by twisting.
Advertisement
Table of Contents
