Table of Contents
Advertisement
7
82
Remove screws 1 on left
and right.
Remove the left and right
headlight side panels.
z
Mark the position of screw 1
on the headlight surround.
Remove screw 1 and
screws 2 on left and right.
Tilt the headlight surround
forward, but do not remove
it at this point.
If applicable, switch off the
ignition.
Disconnect connector 3.
Pull bulb socket 4 out of the
headlight housing.
Installing headlight
surround
Press bulb socket 4 into the
headlight housing.
Connect plug 3.
Advertisement
Table of Contents
