Hours increase by one each
time button is pressed.
Hold down button.
Minutes 4 flash.
Press button.
Minutes increase by
one each time button is
pressed.
Hold down button.
End setting; set time is dis-
played.
Multifunction display
Selecting readings
Switch on ignition.
Press button 1.
If you prefer, you can use
button 2 for this purpose.
The odometer display field
indicates the values below in
the following order beginning
with the current value:
Total distance covered
Tripmeter 1 (Trip I)
Tripmeter 2 (Trip II)
Operating range (after
reaching reserve level)
Resetting tripmeter
Switch on ignition.
Select desired tripmeter.
4
31
z