Table of Contents
Advertisement
7
86
Lay on tail-light protection
plate 3.
Install screws 1.
Install screws 2.
z
Installing seat (
Replacing turn indicator
bulbs
Make sure ground is level
and firm and park the mo-
torcycle.
Remove screw 1.
48)
Pull screw connection side
of lens out from mirror
housing.
Remove bulb 2 from light
housing by turning it coun-
terclockwise.
Replace defective bulb.
Bulbs for flashing turn
indicators, front
RY10W / 12 V / 10 W
Bulbs for flashing turn
indicators, rear
RY10W / 12 V / 10 W
Advertisement
Table of Contents
